PVC Wood Grain Film Process

PVC wood grain film is a specially treated ionomer material. It can simulate various wood grain textures and is used in home repairs, furniture production and other industries. The following will introduce the process flow of PVC wood grain film.
1. Material preparation
The materials required for PVC wood grain film include PVC wood grain film, primer Yanqi spray gun, scraper, rag, etc. Before applying the film, Man will clean and polish the filmed items to ensure that the surface is smooth and free of impurities.
2. Primer treatment
Before applying PVC wood grain film, you need to perform primer treatment first. Primer can enhance the adhesion and durability of PVC wood grain stickers. Pour the primer into the Yanqi spray gun, spray it on the surface of the film, use a scraper to spread the primer evenly, and then wait for the primer to dry.
3. Film processing
After the primer is dry, the PVC wood grain film can be applied. Spread the PVC wood grain film on the surface to be pasted, and use a scraper to apply the film flatly to the surface. When applying the sticker, be careful to avoid the generation of bubbles. You can wipe it gently with a rag to remove the bubbles. When the film is completed
Finally, use a scraper to cut off the excess parts.
4. Surface treatment
After the film is completed, the surface needs to be treated to make it smoother and smoother. Use a scraper to smooth the raised parts of the surface, and then wipe the surface with a cloth to make it smooth.
5. Glazing treatment
After surface treatment is completed. Can be varnished to make it brighter. Apply the polish on the surface, wipe it evenly with a rag, and wait for the polish to dry.
The above is the process flow of PVC wood grain film. By following these steps, you can produce various exquisite PVC wood grain film products. Pay attention to safety during operation, avoid the generation of harmful gases and substances, and ensure good ventilation of the operating environment.