Simple Cleaning And Maintenance Methods For Wood Grain PVC Floor Film

1. First, clean all the stains on the floor tiles thoroughly. If there is glue or sticky stains, use a neutral detergent and 3M red scouring pad to carefully and gently remove them.
2. Sprinkle the floor cleaner (please use according to the instructions) on the floor tiles, use a waxing machine to remove the dirt on the floor tiles, use a dry mop to mop up the dirty water, and then wipe the floor clean with clean water (if there is no waxing machine, you can use other tools instead and carefully remove the dirt).
3. After the floor is dry, pour the water-based wax on a clean dry mop and apply the wax evenly on the floor tiles.
4. It takes about 20 minutes after waxing to let the surface of the floor tiles dry. You can step on it only after it is dry. You can use an electric fan to shorten the time. According to experience, it takes about 8 hours to completely dry after waxing. If there are heavy objects to be moved, you must wait until the wax is completely dry before moving them. This will keep the floor tiles bright and beautiful.
5. The above four steps are general cleaning methods. You can refer to some relevant information of Shenzhen Hancai. If the floor tiles have been used for a period of time and waxed many times, and then turn yellow and need to be re-waxed, they should be treated with a wax remover. The method is as follows: Use the wax remover directly without adding water. Sprinkle it evenly on the area to be dewaxed for about 10-15 minutes. After the wax remover penetrates into the floor tiles, sprinkle the floor tiles with water. The wax must be completely removed, otherwise it will not be shiny after re-waxing.